Posts Tagged With: repurposing

From Trash to Treasure – Making a Bucket Table with Storage

What do you do if you need a patio table and it’s just not in the budget to buy one? No problem for a DIY-er like yourself: make one! Repurpose an old metal wash tub into a fabulous outdoor coffee table. We’ll show you how.

Build the Perfect Patio Table

If you don’t have an old metal tub laying around, you can find them at farm supply stores and hardware stores. Round or oblong, these tubs are usually low enough to make the perfect table or even a foot stool. Smaller buckets make great side tables or ottomans.

What You’ll Needdiy-patio-coffee-table-from-a-bucket.jpg

  • 1/2 – 3/4-inch plywood
  • 2 x 6 inch boards
  • Drill
  • Jigsaw
  • Sander
  • Liquid nails glue
  • Outdoor silicone caulk
  • Stain and polyurethane protectant

Need Extra Storage? This Table Has It

Decide how large you want the table top to be. A good size is three inches wider than the diameter of the bucket. The inside of the tub makes great storage space, so consider whether you want to permanently attach the table top to the bucket or build it so you can lift it off for easy access.

diy-metal-bucket-patio-table.jpg

Make a Bucket Storage Table in 9 Steps

  • Trace the outside diameter of bucket onto the plywood – Mark 3-inches outside of that line for where you will cut.
  • (Optional) Make the top a lid – Draw a second circle and cut 1-inch inside the diameter of the circle.
  • Cut the circles with the jigsaw.
  • Glue the smaller circle onto the larger one – The smaller one will fit inside the bucket and hold the lid in place.
  • Add liquid nails glue to the larger circle – Add the boards to plywood. Allow 24 hours to dry.
  • Cut the boards in the shape of the larger circle.
  • (Optional) Screw the boards to the larger circle – This will keep them from shifting if glue fails.
  • Sand the top and edges of the table top.
  • Stain or paint and coat with a polyurethane protectant.

Keep Your Table from Blowing Around

If you don’t want to use the inside for storage, consider adding sand or a concrete block to give the table weight so it won’t blow around. You can permanently add the table top onto the bucket by flipping the bucket over and applying liquid nails to the edge. Place the plywood on top and allow to dry. Caulk between the plywood and the bucket to protect against moisture.

Extra Seating Optionsbuckset seats

Create an ottoman with a smaller bucket. Glue 2-inch foam padding to a small plywood circle and cover with outdoor fabric. Keep the fabric taunt and staple it on the underside. The covered circle fits inside the opening of the bucket. If you want the ottoman as additional seating, then be sure to place a concrete block inside the bucket to support the covered seat.

Save Money with Repurposed Furniture

Repurposing old items into useful patio furniture is a fun weekend project. It is a great way to save money, while unleashing your inner creative side. So next time the wind blows your patio furniture off the deck, leaving it in tatters, don’t sweat it. Just laugh and head to the garage, surely you have a few extra buckets laying around. Take that wind!

Expert Advice

From jigsaws and drills to sanders and staplers, our expert staff is always on hand to help you find the right equipment for your next outdoor DIY project. Want to create more repurposed outdoor furniture? Check out our blog on building a DIY Outdoor Couch to Enjoy All Summer Long. As always, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, Renovate, Restore and Renovate, spring checklist | Tags: , , , , , | Leave a comment

[DIY How-To] Repurpose Your Dead Trees Into Mulch & Firewood

how to repurpose dead and fallen tree limbs

Are your trees healthy? Even though fall is typically not the season to prune your trees, which encourages growth or flowering next spring (this is usually done after the coldest winter weather has passed), it is a perfect time to assess the health of the trees on your property. Removing dead limbs won’t encourage growth, and will help eliminate potential problems brought on by inclement weather. It will also provide you with ample mulch and firewood for the long cold months ahead.

Remove Tree Limbs

  • to get rid of diseased parts and save the tree
  • to avoid personal injury or property damage
  • to cut back overgrowth

Start at the Top

Look for tree hazards by scanning the tree from top to bottom. Use binoculars if needed and check how vigorously the tree is growing. Compare its growth to others around it. Vigor is reflected in the amount of leaf cover, leaf size, color and condition. If the tree seems to be thinning or experiencing stunted growth, then it may not be flourishing as robustly as it should.

How Does the Trunk Look?

Continue your examination down the trunk of the tree. Look for forked trunks, which indicate potential weaknesses. Signs of decay may also be evident. These present themselves as cavities, cankers or conks (fruiting bodies of fungi) on the trunk itself.

Getting to the Bottom

Finally, check root zone of the tree. Look for mushrooms and other fungi that might be growing around the base of the tree. This is a sign the tree roots may be decaying. Construction and trenching are often causes of root damage, so protect your trees when work is done near them.

Make Your Cut Count

Pruning dead limbs is necessary to keep you and your property safe and it needs to be done properly. Make clean cuts with sharpened tools. Look for the “collar” or swollen tree flesh that develops where the dead limb joins the healthy section of tree. This is the tree’s natural defense system. Make your cut using a pruner or a chain saw just outside the collar, leaving as little stub as possible. Do not remove the collar because it is needed to fight any remaining disease.

Making Mulch and Firewood

Once you have examined your trees and removed the dead limbs, recycle the debris into mulch or firewood. Using a wood chipper, you can make easy work of breaking it all down. The size of the tree limbs determines the size of the chipper you will need. You can mix grass clippings in with your grind or even run the mixture through the chipper twice to get a finer mix. For larger tree limbs or stumps use a log splitter to cut the debris down to a usable size for the fireplace.

“Snag” a Place for Wildlife to Live

Food for thought – if a dead or dying tree does not pose a hazard to people or property – why not leave it as part of your landscape? “Snags” or wildlife trees are excellent habitats for a variety of species of animals. Birds and small mammals use snags for nests or storage areas. Woodpeckers feed off the insects in them and hawks use them as perches for hunting. Snags can also be created from living trees. An arborist would be able to help you select a good candidate for a snag in your yard. Snags provide hours of wildlife watching.

Expert Advice

Our expert staff is always on hand to help you with all of your landscape projects. Check out some of our blog posts on how to remove a dead tree for more information on tree cutting, as well as a list of tools you might want to use in getting rid of tree limbs and trunks. If you have any other questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, Gardening and Lawn Care, How-To's | Tags: , , , , , , , | Leave a comment

Spring Refresh DIY Idea #1 – Building a Better Chicken Coop

How to Build a Chicken Coop

More and more people want to raise chickens. This trend isn’t just in rural areas but in urban ones, too. Folks want to get back to a more organic way of living and eating. If you are a would-be chicken farmer, then it’s time to get your ducks (or dare we say chickens) in a row. Your first big task is to build a chicken coop.

The Scoop on Coops

You need to ask yourself a few key questions upfront to help you refine your game plan:

  • How many chickens do you want to keep? This will determine the size of your coop. A flock of at least three hens would need a 4×8 foot screened-in run as well as a 4×4 foot critter-proofed coop where hens can lay eggs.
  • Do you know where you’ll build or place your coop? You need to place it in an area where it will have adequate shade during the hot summer months and ample sunlight during the cold winter months. Near a tree that drops its leaves in fall is perfect.
  • Do you want to build a coop from scratch or do you want to repurpose an existing building? Recycling an existing structure will save you money but it will still need to be altered to meet the needs of the flock. If you build one from scratch, you may want to purchase detailed chicken coop design plans that will take you through the project step by step. There are plenty of “free” plans out there; just remember – you get what you pay for!

Now that you have determined the size, placement and construction design of your coop, you are ready to begin. Here are a few tips to keep in mind.

  • Raise it up – Make sure the floors of the nesting area are raised to help keep chicken feet dry during rainy weather. Galoshes are not an option for these “kids.”
  • Let there be light – Egg production is affected by the amount of light the flock is exposed to. This is why production is down during winter months. To counter this, install a light inside the coop. Use a warm light source and not a blue/white one.
  • Feather that nest – Give the flock warm places to nest. One idea is to use a plastic storage bin with the lid on it. Cut a hole in one end for the chicken to enter through and a second hole on the back so you can reach in for the eggs. Be sure to line the inside of the bin with hay for warmth. The plastic bin makes it easy to pull the nest out, clean it and return it back to the coop.
  • Keep the critters out – Raccoons and other predators are smart so protect your flock with metal latches that cannot be easily opened. Be sure to lock your coop up at night to keep them safe.
  • Free to roam (sort of) – Yes, you want chickens to have ample room to roam but you can’t watch over them all the time. Building a screened in run will keep them safe and provide you with peace of mind.
  • Can we vent? – Good air circulation is essential to keeping your flock in robust health. Place screened in gaps between the walls and the roof to allow heat to escape and air to enter without causing drafts.
  • You have to use the coop, too – Sure, the ladies are a little on the short side, but unless you want to crawl on your hands and knees to retrieve their eggs, you might want to consider your comfort in the design of the building. You will be entering it frequently to feed, water and clean.
  • Let’s decorate this hen house – You will be looking at this chicken coop for a long time so you might as well make it look nice. Consider painting the outside or adding hanging plants. Let your imagination run wild.

Once you are finished with your incredible chicken coop sit back and relax. Bask in the knowledge that your chickens are happy and living in a condo creation that you built. Just ignore the ugly stares you may be attracting are from your dog! (Note to self – next project: new dog house).

Expert Advice

Our expert staff is always on hand to help you with your DIY yard projects. From circular saws to nailers and staplers, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, How-To's | Tags: , , , , , , , , | Leave a comment

[DIY Project] How to Convert An Old Record Player Into A Coffee Bar

How to Turn a Record Player Into a Coffee BarRepurposing furniture is one of the most satisfying and self-accomplished thing an avid DIY-er can do, myself included. My husband and I were thrilled at the prospect of making a personalized coffee bar for our new apartment, perfect to house all our tea and coffee essentials. Coming from a fairly handy family, it just so happens that my dad had the perfect piece of furniture…an old record player with loads of character. With a little help from him [and all his power tools] we turned this dated record player into a fun and functional coffee bar.

First things first, we assembled our tools and materials….

Tools & Materials:

Then we got to work transforming our soon-to-be coffee bar. You can see what it looked like before (let’s just say my dad had other plans for it before I got ahold of it…hence the green spray paint). Then, see the painted and waxed pieces ready for assembly. [Note: a few key steps are left out of the gallery, but read about them in the steps below].

The Steps:

  1. Clear and Spray Paint the Hardware: use your screwdriver and pliers to remove hardware, such as handles, hinges, etc. All the removed hardware was then spray painted with glossy black paint.
  2. Flush Cut the Wood: for removing wood pieces precisely and accurately, use a vibrating saw. For this piece of furniture, the bottom piece where the lid lifts up was removed (see the lid picture above). In addition, the back of the cabinet was removed and a new panel was installed (see how in next step).
  3. Cut and Mount Louwon Board: a new back for the cabinet was installed, made from Louwon. In order to get a precise piece, a paper template was placed and a handheld power jigsaw (or band saw) made the exact cuts. Then the board was put in place and attached with an air nailer. [Note: for this coffee bar there is actually a secret compartment in the bottom right compartment, so that back part was carefully cut out and a new bottom was installed to make a shelf for more storage].
  4. Paint the Doors, Frames and Coffee Bar: the lattice frames, two doors (from the top lid and front right), as well as the coffee bar itself, were painted thoroughly with Annie Sloan paint and then sealed with Annie Sloan wax. This paint is easy to apply and only takes one well-covered coat. The beauty of it is the shabby-chic look it portrays.
  5. Reupholster and Mount Door Inserts: the old door inserts were removed, as were the old fabric panels by unscrewing from the lattice frames. While the lattice frames were painted and drying (as seen in the picture above), new leather panels were measured and mounted to the insert boards with contact cement. After the leather panels dried and the lattice frames also dried, the panels were screwed back into the frames.
  6. Reattach the Doors and Frames: the doors and frames were reattached to the coffee bar with their respective hardware. Then voila! The completed coffee bar!

A Word From Me (the author):

Although your next DIY project probably won’t entail turning a record player into a coffee bar, there are many ideas out there for repurposing old furniture into functional and stylish pieces for your home. Check out Pinterest for a little inspiration! That said, some of the tools and applications from this project can definitely be used for yours. Simply let us know what tools you are looking for, because we do daily rentals out the wahzoo! And please comment below if you have any great ideas for DIY upcycles or your own projects to share.

Categories: DIY Projects, How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , , , , | 1 Comment

Blog at WordPress.com.

%d bloggers like this: