Posts Tagged With: nail gun

8 Ways to Kick Your Backyard Up a Notch

create your perfect backyard entertaining areaWith summer in full swing, you want to entertain outdoors in a backyard that is something special. We’ve put together a list of what we think makes for a perfect outdoor entertaining area, including links to some of our past articles – see if you can’t find your next DIY project!

Big or Small, Utilize It

Whether your backyard is big or small really doesn’t matter, it’s how you utilize your space that counts. Your first task is to determine how you’ll use the entertainment area and what kind of budget you have to work with. Do you want to use your entertainment space:

  • for the kid’s pool parties?
  • for grilling with friends?
  • for relaxing with your family?
  • all of the above? 

Create Entertainment Zones

Just like rooms in your house, divide your yard up into zones – dining, entertainment, and conversation areas. See where they best fit in your landscape and tie them together into a cohesive design. Your backyard may just need tweaking in order to have it just the way you want it.

8 Elements for a Perfect Outdoor Entertaining Area

  • Water – This could be in the form of an in ground pool or maybe a backyard pond but a water feature will boost the value of your home and provide plenty of enjoyable days outside with friends and family.
  • Covered dining area – Consider installing an awning or roof to protect your mealtime from bad weather. It would extend the usability of your backyard. A covering like a pergola or fabric curtains will give the space a romantic feeling.
  • Grill – Whether it is charcoal or gas, summertime is grilling time so incorporate one into your entertainment area. Remember to give yourself storage space nearby to stash all your grilling accoutrement. Treat it like an outdoor kitchen, add a small refrigerator.
  • Deck – It moves you out of the house and into the yard. Your deck can be where your grill is located and where your dining area is. You can have different levels of a deck to include space for dining and conversation.
  • Outdoor lighting and sound system – Trying to dine by the light of an outdoor flood light can kill the mood in a hurry. Consider lights for your deck, grilling area and walkways. Add speakers to your space so everyone can enjoy the music or the big game.
  • Poolside Bar – If pool parties are your thing then having a convenient snack area close to the pool is a perfect way to extend the outdoor fun and keep wet feet out of your house.
  • Lawn and garden – Having a section of lush grass for kids to play on or a beautifully scented garden to stroll through extends your entertaining possibilities into the far reaches of your yard. Scatter conversation areas throughout your garden by adding benches and lawn furniture.
  • Outdoor fire pit – Summer always goes by so fast and installing an outdoor fire pit or fireplace can help extend your outdoor entertaining season into the fall.

Personalize Your Space with Decorations

Use decorative design elements like colorful cushions, pillows, planters and garden art to help tie your entertainment zones together. Come up with an outdoor theme that reflects you and your family’s interests – favorite sports teams, places, travel dreams or heritage, for instance.

Create the Perfect Entertainment Area for You!

Your backyard is a blank canvas for you to create the perfect entertainment area. Hopefully we have given you some ideas on how to kick your space up a notch. So get busy! Summer is calling and that grill isn’t going to light itself.

Expert Advice

From circular saws and nail guns to orbital sanders and drills our expert staff is always on hand to help with your next DIY backyard project. As always, if you have any questions about pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Advertisements
Categories: DIY Projects, Gardening and Lawn Care, How-To's | Tags: , , , , , , , , , , | Leave a comment

How to Create a Custom Picture Frame in 6 Simple Steps

How to Make A Custom Picture Frame

Have you ever come across an incredibly unique poster, painting or photograph that doesn’t fit into a standard frame size? If you live in Indianapolis you’ve probably seen the Neighborhoods of Indianapolis poster, which unfortunately falls into this category. Because of this, I had to find a new solution for framing mine, and since a custom frame from a craft store costs a small fortune, I decided to utilize my dad’s expert DIY ability instead.

First things first, gather the tools…

Thankfully my dad has a mecca of power tools in his shed, so he was able to come up with everything we needed. However, for those of you without an extensive tool collection, Runyon has a huge array of tools for rent and purchase. Stop in or check out our website for the full catalog of products. Here are all the tools you need (assuming you already have trim for the frame and plywood for the back frame piece):

Things to keep in mind, according to good ol’ dad…

The goal is to find a way to join the corners of the trim that will ultimately form the frame. If you want to get fancy with it you can use a router bit to form tongue and groove joints, but this is only optional. You could also consider a layered frame look, i.e. stacking trim to create a shadow box style. The key to this whole process though, is to make sure your parallel sides are exactly the same size in length and that the corners are cut to perfect 45-degree angles. Accuracy is crucial for this to work properly.

And now the steps…

  1. The first thing you have to do is measure and cut your frame sides into parallel pieces i.e. make sure parallel sides are equal in length. Also, make sure you leave enough length for the 45-degree angles in the next step.
  2. After cutting the trim pieces to the correct length, it’s time to measure and cut 45-degree angle corners. The miter saw is integral for this step because it will ensure accurate cuts. Test and fit your pieces as you go to make sure they line up with no gaps.
  3. Once all your frame pieces are the proper length and have well-fitting corners, glue and clamp the corners together for at least an hour.
  4. Then for additional stability, toe-nail the corners together with a brad gun (nailer). At this point your frame should be complete with the exception of the back piece and hanging hardware.
  5. Attach the back piece of plywood with a nail gun after ensuring it’s the correct dimensions (i.e. enough to cover the frame opening, but not too big that it overlaps outside the far frame edge).
  6. And the very last step, install hardware for hanging the frame. You can pick up brackets, a wire set, etc. from a hardware store. Just be sure whatever you buy is rated for at least the weight of your frame – for instance, mine weighs about 50 lbs.

And voila, you’re ready to hang and admire your picture for years to come! If you have any additional questions about this process or the tools used, please don’t hesitate to comment below or contact us. Happy DIY-ing!

Categories: DIY Projects, How-To's | Tags: , , , , , , , , , | Leave a comment

Advanced Tutorial: How to Reupholster a Chair in 5 Steps

Reupholstered Chair (before and after)Reupholstering any piece of furniture, let alone a complex wingback chair, is not for the faint of heart. It takes a decent amount of hard work, familiarity with sewing and using power tools, an eye for detail and a precise hand. Although this particular project took several weeks to finish, the result was well worth it all. Now, there is a lot involved in reupholstering a sturdy piece of furniture on your own, so below is a loose set of steps. Also, consider the following tips before undertaking such a project, or for you ambitious DIY-ers, keep them in mind throughout the project.

Difficulty: moderate-hard

Necessary Tools and Supplies:

  1. Fabric (this project took about 6 yards)
  2. Sewing machine and thread
  3. Pliers and/or flathead (for prying up staples)
  4. Scissors
  5. Fabric marker
  6. Staple gun
  7. Nailer
  8. Screwdriver

Reupholster Your Chair in 5 Steps:

1. Prep Work: First things first, you have to take off the chair legs (unscrew with a screwdriver). Then you must begin taking staples out of all the fabric. This may seem simple (I certainly thought it would be), but be prepared for a lot of prying — having the right tools really makes a difference here. I used a pair of pliers and a flathead screwdriver for popping out the staples.

Now, be sure as you take each piece of fabric off that you label which part of the chair it came from so you don’t mix them all up. Then once all the upholstery has been removed from your chair, you can start tracing and marking the old fabric pieces onto the new fabric, again being sure to mark which piece goes where.

2. Sew Back Together: Next, you have to sew together your new fabric pieces (based on which of the old pieces were sewn together…be sure you make note of this too). Again, this was a process, and it took really careful detail, being sure to cut and sew very close to the original fabric.

This chair had piping as well, so I also had to sew the piping and then sew each between the two respective pieces they went between. The cushion cover was crucial in this step because I had to make sure it fit correctly. And keep in mind, it is much easier to make a piece smaller than to try and make it bigger.

3. Assemble It All: After the upholstery is sewn and categorized by where it goes, you can begin placing each piece onto the chair form. My suggestion is to begin placing each piece in the same order with which you removed each piece. So, the first piece I took off on the old chair was the bottom side panels, so I put those back on first, then worked my way up. Again, this will be as complicated or as simple as the original chair, ottoman, couch, etc. that you choose. I also chose to add tufts, so this was something I made sure to place before stapling anything down.

4. Secure Down with Staples: After each panel is in place, you can begin stapling them in an organized order. For this chair, the back panel and the bottom panel were the last to go on. Keep in mind, you want the fabric secured well, not too tight, but also not too loose. If worse comes to worse, you can always take staples out and re-do them. However, this would be arduous and counterproductive, so be sure the fabric is placed well before pulling the trigger.

5. Final Touches: The last step is to put your legs back on the bottom and the cushion back in the seat. Then, as long as everything looks clean and crisp, you’re done!

Resources and Help:

This was definitely the down-and-dirty version of reupholstering, not as specific as a post explicitly for reupholstering a wingback chair. That said, if you would like a resource for step-by-step pictures and nitty-gritty details, check out this blog post. It helped me a lot. Really once you start though, it all starts making sense. If you have any questions about how to reupholster, the tools to use, renting tools, specifics on my process, etc. please comment below or email me (heidi@runyoncompanies.com) Happy reupholstering!

Categories: DIY Projects, How-To's | Tags: , , , , , , , , , , , , , , | Leave a comment

Create a free website or blog at WordPress.com.

%d bloggers like this: