Posts Tagged With: Lawn aerator

Getting Ready for Fall Part 3: Pampering the Grass

Prep Your Garden for Fall - Dethatching, Overseeding and AeratingHas your lawn had its share of foot traffic this summer? With outdoor activities in full swing, it’s a sure bet your grass is a little stressed. It may be a toss-up as to which of you is more excited about the kids going back to school – you or your lawn! A little lawn pampering may be just the ticket. It will love you for it (and you will love how it looks next year).

Adjust Your Mower Height

Once the summer heat is gone, lower your lawn mower to a regular height of about two inches. Cutting your grass shorter will help prevent matting under leaves and snow. Avoid cutting it too short though, otherwise weeds can take over if the grass thins out too much.

Continue Watering Schedule

Don’t slack on watering just yet. Until temperatures really begin to cool, continue to water your lawn as you have been. A general rule is to give your lawn about an inch to an inch and half of water a week. This will vary depending on where you live, the condition of your soil and the type of grass you have.

Check for Thatch

Check your lawn for thatch – a thick layer of dead organic matter mixed with living plant parts that builds up at the surface of your grass. Over-fertilizing and watering too frequently can cause thatch and lead to disease and insect problems. A dethatcher has powerful blades that pull the thatch to the surface. After using the dethatcher, rake up the thatch debris and compost it.

Pesky Weeds Be Gone

Fall is also a great time to attack those pesky weeds like dandelions, clover and other broadleaf weeds. Applying an herbicide spray that contains glyphosate, 2 4-D or MCPP is best. The weeds take these chemicals down into their root system, effectively stopping their chances of returning in the spring. The herbicide needs to be applied when temperatures are more moderate and the soil is moist.

Fall Lawn To-do List

Now that you have thatched your lawn and treated for weeds, improve the condition of your soil and grass using these to-do’s.

  1. Aerate the soil. This reduces thatch, improves drainage and loosens the soil. Using a plug type aerator is best since there is less chance of compacting the soil.
  2. Apply a top dressing. This is a mixture of loam, sand and peat, which will help amend the soil. Put a thin layer over the grass and plug holes. Avoid smothering the grass.
  3. Work the top dressing into plugs. Use a stiff brush to push the mixture into the plugs.
  4. Repair dead patches in grass. Reseed any thin spots. Use a mulch product that is embedded with seeds and fertilizer to help fill in these areas. Keep spots moist to allow seeds to germinate.

I See Dead Patches

If your grass has too many dead patches, try over seeding the entire lawn. Many over-seed warm season grasses with ryegrass to help thicken up thin or patchy yards. Cisco seeds has a variety of different types of seeds available. One is sure to do the trick for your lawn.

Quick Fix with Sod

Sometimes starting from scratch is the best option. Sod is the quickest way to bring your yard back to life. Now that summer heat is on its way out, it is the perfect time to install a new lawn of cool season grass. Keep the new sod moist for a quick start. It will have plenty of time over the winter months to build a strong root system.

Fertilize Cool Season Grasses

Finish up your yard work by fertilizing your grass. For cool season grasses like bluegrass, fescue and ryegrass, a late summer feeding in September and then again in October/November will help them green up earlier and look better in the spring. Don’t fertilize warm season grasses in the fall because they are dormant. Only fertilize them if they have been over-seeded with ryegrass. You fertilize these types of grasses in the spring.

Mulch those Leaves

Be sure to remove any fallen leaves from your yard before they can mat down and smother the grass. Using a mulching mower will help with this. Also, don’t forget to drain your irrigation lines before the first frost. Shut off the water to the system and then drain each zone separately to make sure there is nothing left to freeze.

A little lawn pampering may be just the thing to improve your stressed out grass. Your hard work will pay off when your grass comes back greener and healthier next spring. Now, if we can just figure out a way to keep the kids and dog off your beautiful green lawn…

Want more information on fall lawn preparations? Check out our blogs, What Everyone Ought to Know About Lawn Aeration, Aerating/Plugging and Slice Seeding and Essential Fall Tools for Your Lawn & Garden.

Expert Advice

Our expert staff is always on hand to help you with your yard and garden projects. From detachers and aerators to mulching mowers and over-seeders, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Advertisements
Categories: Gardening and Lawn Care, How-To's | Tags: , , , , , , , , , , | Leave a comment

[Infographic] Your Guide to Lawn Aeration: The Basics

Spring, between March and May, is the perfect time to consider aerating your lawn. If your yard suffers from poor drainage, poor subsoil, or brown, worn grass, then it is definitely a good idea to consider renting an aerator for a day and giving your lawn fresh new life again. For steps on how to aerate, check out this blog post, and for other helpful tips, read What Everyone Ought to Know About Lawn Aeration. Hopefully this infographic gives you a good overview of the 101 basics involved in lawn aeration. Please don’t hesitate to contact us if you have other questions or would like advice on which aerator to use. We have a variety for rent here. Happy plugging away!

Lawn Aeration Basics Infographic

Categories: Featured Products, Gardening and Lawn Care, How-To's, Infographics | Tags: , , , , , , , , | 2 Comments

[INFOGRAPHIC] Mark These 13 Projects Off Your Fall Checklist

How fitting that this infographic outlines 13 projects for you to complete, what with Halloween right around the corner and all! The first item, aerating and fertilizing, is a really key task. You want a gorgeous green lawn come spring right? Well it doesn’t take much, but with it getting colder each day we advise you do this soon – learn how to here. And cleaning your gutters is fairly simple, yet really beneficial. Our latest post outlines how to effectively complete this to-do item. And all the remaining projects will be covered in upcoming posts, so be on the look out!

Fall Project Checklist

Now, although most of these tasks are outdoor-related, there are smaller indoor to-dos that will be covered in a future post as well. This may seem like a lot, but these weekend projects can be knocked out really easily and are worth the effort because it will leave you with less spring cleaning. Not to mention, a lot of these will ensure a warm and cozy winter.

About the Author

Heidi Hudnall is the current Marketing Coordinator at Runyon Companies. She graduated from Butler University in the spring with a double major in International Business and Marketing, a minor in Spanish, departmental honors distinction and cum laude. She specializes in all things internet marketing, with an emphasis on content creation, website maintenance, blogging, social media, lead tracking and marketing strategy.

Categories: Fall Checklist, Gardening and Lawn Care, Infographics | Tags: , , , , , , , , , , , , , , | 11 Comments

Mark an Item Off Your Fall Checklist – Aerating and Fertilizing

Fall is the perfect time to aerate and fertilize your lawn in preparation for the cold winter months. And with the weather turning cold already, it is a good idea to do this sooner rather than later. The benefit of aerating in conjunction with fertilizing is that it helps the lawn breathe better, in essence by loosening thatch and reducing compaction that occurs when the ground gets hard and frozen. Not to mention, aerating and fertilizing assist in growth by increasing the amount of air and water in your lawn.

Lawn AerationAerating Your Lawn

Aeration machines make the actual process of aerating much simpler than it sounds. There are a few important steps to consider however, just to be sure you’re effectively combing the lawn. The following process is proven effective by The CISCO Company, an industry seed expert.

  1. Make sure the soil profile has had adequate moisture so a plug can be pulled
  2. Set the depth of the aerator at about 2″
  3. Begin at the longest side of the lawn and make runs back and forth, overlapping
  4. When the entire lawn is finished, begin a second pass at a 30 to 40 degree angle

[Note: Several trips may be beneficial]

Endure WinterizerApplying Fertilizer

Fertilizer is crucial for fall because it feeds your lawn with the proper mix of nutrients and allows it to recover from the sweltering summer months. Since it is already late in October, the suggested fertilizer is one that stimulates root development and ensures a quick green-up in the spring. Apply winter fertilizer (Winterizer) after the top growth is finished, but the ground is not frozen. This will ensure growth of the root mass. Some of the benefits of using a winter root builder:

  • Earth-friendly organics for natural slow release and iron
  • Iron for dark green grass
  • Nitrogen feeds and grows roots

Aerating and fertilizing really is not a complicated task on your fall checklist. However, it is one that will make a huge impact on your lawn, and one that is incredibly beneficial when done correctly. For more information about lawn aeration, find more posts here. Or, if you would like more information about the fertilizing process, please contact one of our experts.

About the Author

Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.

Categories: Fall Checklist, Featured Products, Gardening and Lawn Care | Tags: , , , , , , , , , , , , | 4 Comments

What Everyone Ought to Know About Lawn Aeration

An aerator is a machine used to aerate the soil in large lawns and turfs. A lawn aerator is available in two types, namely, spike and core. While the spike aerator makes use of wedge-shaped spikes to dig holes in the earth, core aerators are fitted with hollow tines that pluck out plugs from the soil.

Why Aerate the Soil? Know About Lawn Aeration

  • Better soil drainage: The main benefit of aerating the lawn is that it improves soil drainage, which in turn, is very helpful for the growth of new grass.
  • Gets rid of lawn thatch: Using a lawn aerator to aerate the soil will contain the growth of thatch. Thatch prevents oxygen from reaching the grass roots.
  • Aids growth of worms, fauna: Soil aeration helps the growth of worms, herbs and shrubs in the soil by providing them with the much-required oxygen.
  • Helps new lawns: Aerating the soil before planting a new lawn is proven to be beneficial for the growth of the lawn.

How to Work with a Lawn Aerator

  1. Water the lawn a day before: Before beginning soil aeration, water the lawn the night before as it makes the aerating process much easier.
  2. Flag items in the lawn: Flag important items like sprinkler heads in the lawn so that they are not damaged during aeration.
  3. Check weather conditions: Check if the weather conditions are suitable for aerating. It is not good to aerate during periods of drought or high temperatures.
  4. Run the aerator over the lawn: After flagging items, move the aerator over the lawn to cover all areas. Pay more attention to spaces like driveways and sidewalks where the weed growth is high and water access low.
  5. Apply fertilizer: Immediately after aerating, apply fertilizer on the soil so as to secure maximum possible benefit in the shortest time possible. Instant fertilizing after aerating helps the fertilizer reach the grass roots quickly.
  6. Use pre-emergent: After aerating the lawn, apply pre-emergent on the soil to prevent the growth of weeds.
  7. Water the soil: The last step in the aeration process is to water the soil, which helps break down the core of grass and soil in the lawn, and aids the growth of new roots.

Lawns that have soil with high clay composition and are subject to frequent thatching should be aerated at least twice a year. For lawns with sandy or loamy soils, a single aeration is enough to remove thatch and facilitate grass growth.

Still have questions? Talk to an expert at Runyon Equipment Rental to provide advice on your project.

About the Author

Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.

Categories: Featured Products, Gardening and Lawn Care | Tags: , , , , , , , , | 9 Comments

Create a free website or blog at WordPress.com.

%d bloggers like this: