Posts Tagged With: home renovation

9 Ideas for Your Perfect DIY Bathroom Remodel

Feel brand new! Refreshing a room in your home –especially a bathroom- can be as easy as updating drawer pulls or a shower curtain, to installing new cabinetry, tearing out tile and starting all over again. Whatever your creative ideas –and your budget- can handle, here are a few ideas you can do in as little as a weekend to make your bathroom feel brand new. Below are nine ideas and tips for how to conquer a bathroom makeover.

DIY Bathroom Remodel - sink

1. Put some thought into your potty area.
Make sure you’ve got everything you need for your remodel – paint, plumbing fixtures, tile, tub, toilet and special orders – before you take a hammer or Sawzall drill to your bathroom, so you can use it all the way up to the day you start the project. Your family will thank you! Plus, with all you need on hand you can estimate the extent of work, such as moving the plumbing lines or running new lighting wires, more accurately.

2. White is the new black.
If you’re going to install new sinks, tubs or toilets, even surface tile, consider purchasing them in white. Manufacturers produce and sell more white bathroom fixtures than any other color, so they cost less than those potentially special-order varieties. Add splashes of color with low-cost accents, such as paint, furnishings, artwork, towels and other accessories.

3. Go to town with paint.
Bold enough to transform a room, yet practical enough for a weekend project, paint is great for freshening up a bathroom. Mold- and mildew-proof primers and paints are not only good for walls and ceilings, but for refinishing cabinet doors and hardware or towel racks and other fixtures. There are even options for painting over tile and other ceramics. Create a spa environment with watery blues, greens and neutral colors; even white does the trick. Use an airless sprayer for overall coverage and protect any painted designs with two coats of clear polyurethane. Learn more about using an airless paint sprayer here.

4. That old thing is new again.
Repurposing old furniture for a bathroom adds personality, not to mention, storage with character. Turn an existing sideboard or dresser into a vanity by cutting a hole in the top for a drop-in sink and faucet. Add a freestanding chest of drawers for storage. Install vintage shelving in smaller bathrooms. Comb salvage yards for vintage tubs, sinks, countertops, flooring, benches and other unique finds.

DIY Bathroom Remodel - sink and toilet5. Accent with architecture.
Using tile as an accent can add a punch of color in the right places. Even though glass tile can be expensive, you don’t need a lot of it to create a dazzling effect. Use a tile cutter to cut up larger tiles or break old tiles with a hammer to create your own mosaic designs. Apply colored gout quickly with a grout hand pump, adding an extra layer of design. Add interest to a wall by running a tile border vertically, instead of the usual horizontal accent. You can also add texture to walls by using beaded board. Use an air stapler to install panels, which look as authentic as individual beaded boards, are lightweight and less expensive. Think of the lighting as architectural interest, too – change outdated fixtures with new lights made especially for bathrooms and have a purpose. Recessed lighting over the shower for better illumination, Hollywood lights around a mirror for romance, even a floor or table lamp for a boudoir feeling.
 
6. Reflect a new image.
If your medicine cabinet looks like it belongs on the set of Mad Men, replace it by hanging a framed mirror or two, making the room seem larger. Some mirrors are made to tilt away from the wall, which adds functionality.

7. Daring demo.
If you plan to remove the floor, use a faster, simpler technique: rip up the floor from the underlayment – the layer of material next the subfloor. Set a circular saw blade just deep enough to cut through the floor covering and the plywood underlayment. Then cut into small sections, making removal easier. Afterwards, install a new underlayment of quarter-inch plywood or cement board and install the new floor on a clean surface.

8. Simple does it best.
Use basic tools like an air nailer, stapler or screw gun and make short work of easy updates like installing a new toilet seat, towel bars or toilet paper holder, replacing a standard shower rod with a curved one, adding pullout shelves to deep cabinets or changing out an old shower head with a new handheld sprayer. Even replacing the countertop is a simpler job with the right tools – if your vanity is in good condition.

9. Out of your comfort zone? Call a pro.
With any home project, do-it-yourself mistakes can cost you big time. If you need the help of an electrician, plumber, carpenter or mason for your bathroom update, call one. If you have questions or comments for us, please utilize our section below or the contact us page on our website. We’re here to help!

About the Author

Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.

Categories: Choosing Equipment, How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , , , | 1 Comment

Spruce Up Your Wood Floors in Time for Winter Entertaining

Are you planning to host a huge Super Bowl party at your place this year? How about a Valentine’s Day soiree, February book club or a group binge-watch of Downton Abbey? If so, would you like to spruce up your floors first? Well, here’s the good news – you have more than enough time to refinish your floors and even install new flooring. If you start the project now that is…and, we can help!

Equipment, Materials and Time

Wood Flooring RenovationTo install a new floor you’re most likely looking at a weekend project. Add at least a week to the weekend project if you’re refinishing a floor. However, most of the equipment and materials you’ll need to get the job done efficiently are not stored in your garage. Tools like floor strippers, sanders, polishers, laminate floor staplers, tapping blocks or wood saws are available for rent, while a vacuum, hammers and a pry bar can come from your toolbox. You’ll probably want to spend a little time choosing laminate wood flooring and the foam cushioning recommended for the type of laminate floor that gets installed underneath. Then you’ll want to buy wood glue, sand paper, polyurethane finish, plywood and spacers from your local hardware store.

Once you get it all home, each project requires a bit of demo work before application, from removing all furniture from the room to sanding or buffing existing wood floors, to prying up old carpet, baseboards and flooring.

How to Install New Laminate Wood Flooring

Installing a “floating” floor, which is not directly attached to the subfloor, but uses padding in between, cuts down the sound and compensates for any irregularities in the floor.

  1. install laminate flooringAfter all the old material is stripped away, make sure what’s left is level with the floor in the adjoining room.
  2. Cut new plywood to size, then secure in place with wood glue and nails.
  3. Position a layer of foam padding on the plywood.
  4. Place the first row of floorboards against the wall with the grooved side to the outside, putting spacers between the boards and the wall, which allows for the wood to expand. Cut the floorboards to size as needed.
  5. Fit each board tightly together by tapping each board into place using a hammer and tapping block.
  6. Move out from the wall, fitting boards and tapping them into place until the entire floor is covered.
  7. Once the new wood flooring is in place, remove spacers.
  8. Replace the baseboard molding, covering the gap between floor and walls.
  9. Bring back the furniture.

How to Refinish Wood Floors

If your wood floors are scratched on the surface, you can clean and remove the scratches without having to sand down to bare wood. Here’s how:

  1. Clean the floor with a hardwood floor cleaner or mix your own (10 parts water to 1 part white vinegar).
  2. Wipe down the floor with a soft cloth.
  3. Hand sand any parts a buffer can’t reach, such as the perimeter of the room, with 180-grit sandpaper. Rub with the grain about five inches out from the baseboard, until the finish dulls.
  4. Put on a dust mask and lightly sand the rest of the floor with a buffer/polisher, sander or stripper in the direction of the grain, making sure to keep the machine moving at all times, covering every area.
  5. Let the dust settle for about 15 minutes, then vacuum it up using a soft-bottomed attachment, following each strip of flooring, then sweeping across them to get any powder that settled between the boards.
  6. After vacuuming, use a microfiber cloth to wipe the floor a final time, along the grain.

refinish your floorsNow you’re ready to refinish the floor by applying a fresh coat of finish. If you use a water-based polyurethane, you can apply a second coat in about three hours. If using an oil-based polyurethane, you’ll have to wait about eight hours for each coat to dry before adding another. Instead of using the finish straight from the packaging, it’s a good idea to remove any impurities by straining the finish through a cone filter into a clean plastic container before application. Also, cover your shoes with booties and your nose and mouth with a respirator.

Once a section of finish begins to dry, lap marks will appear. To guarantee a line-less finish, pour only as much finish as you can spread in a 10-minute time frame.

  1. Starting for a point that’s farthest from the exit door, brush a 3-inch-wide stripe beside the baseboard.
  2. Next, pour a 1-inch-wide stripe of finish in line with the wood grain.
  3. Using a long-handled roller with a ¼-inch nap cover, roll out the finish with the grain, then across it.
  4. Working quickly to keep a wet edge, overlap the finish with each pass, for 10 minutes.
  5. After the 10 minutes, brush more finish along the edge, then pour and roll for 10 more minutes until the floor is covered.
  6. Wait three hours before adding a second coat of finish.
  7. Wait about a week before replacing furniture.

To keep your floor looking as good as new, experts recommend a fresh coat of finish every two years. We carry a wide variety of the tools needed for installing or refinishing wood floors. If you have any questions about what to choose, pricing or how-tos, don’t hesitate to contact us.

About the Author

Jack Runyon is the president of Runyon Equipment Rental. He has 21 years of rental experience, as the 3rd generation son to carry on the family tradition and his grandfather’s vision. He prides the company for its devotion to ethics, quality products and customer service. Jack is known for his passion and vast expertise.

Categories: How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , , , | 1 Comment

Blog at WordPress.com.

%d bloggers like this: