Posts Tagged With: fire bowl

Light It Up – Add a DIY Bonfire to Your Backyard

fireThere is nothing better than a roaring fire on a cool spring evening. By adding a fire pit or heater you will extend the time you use your outdoor space for entertaining. Stop waiting for warmer weather! Building a fire pit is a simple, inexpensive project and one hot idea to add value to your home.

Let There Be Fire!

First, ask yourself a few questions about how you plan to use your fire pit or heater?

  • Do I want a heat source or ambience? – To heat a deck, a propane heater works well. If you want to roast marshmallows, nothing beats an open flame.
  • Do I want to burn wood or gas? – Consider the cost of logs and propane tanks when trying to decide. Electric heaters are also an option.
  • How much maintenance do I want? You will have to clean out ash and debris from a wood burning fire pit. Gas heaters will just need tanks replaced.

Watch Out for Flying Embersbonfire snacks

Got your heart set on an open flame fire pit? Constructing one is an easy weekend project. You can make yours as simple or elaborate as you wish.

Here are a few things to keep in mind:

  • Check local ordinances – Do they allow open fire pits in your area?
  • Locate your pit away from trees and buildings – Flying embers can ignite roofs and mulch.
  • Use fireproof materials – If you decide to use mortar make sure it is for use on fireplaces.
  • Scout out the desired location – Is it level and dry? Determine if wind direction will blow smoke back toward house. Too much wind will make it hard to keep your fire going.
  • Have a fire extinguisher handy – A bucket of water will work too.
  • Keep the area around pit clear – If building the pit on bare ground, lay gravel around it and make sure there is no vegetation or roots to burn.

Easy to Build, Easy to Enjoy

Above ground fire pits are easy to build. First determine the materials you want to use (concrete pavers, fire bricks, stones). You can dry fit the blocks or use mortar. Consider buying a removable metal fire pit bowl for easy clean-ups of ash. Also a wire cover will help catch flying embers.

Steps for Building a Fire Pit:

  • Use the diameter of the wire cover to determine the outline of your pit.
  • Lay the first layer of blocks around the outside edge of the cover.
  • Remove the cover and continue building layers up to desired height – Stagger blocks.
  • Use a level as you go.
  • Install a fire pit bowl – It can lift out and make clean-ups easier.
  • Install grate – To allow air to get to the logs.
  • Place your logs inside, light, and enjoy

Fire Bowls – Keep it Moving

Want something a little less permanent? Portable fire bowls are an inexpensive way to dress up your patio and can be moved into storage over the winter months. Be sure to cover them when not in use to help prevent rust.

Relax with a Blazing Fire

Watching a blazing fire under the stars is a great way to relax. Don’t let the crisp evenings of spring and fall keep you from enjoying the great outdoors. Move the party outside with a new fire pit, fire bowl or heater. Now it’s time to add another log to the fire and get ready for the S’mores. As the caveman once said – “Fire good!”.

Expert Advice

From shovels and wheelbarrows to tampers and concrete mixers, our expert staff is always on hand to help you find the right equipment for your next outdoor DIY project. Want more information on how to build your own fire pit? Check out our previous blog “How to Make a Concrete Fire Pit or Fire Bowl in 5 Easy Steps” for more helpful tips. As always, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Advertisements
Categories: DIY Projects, Fall Checklist, How-To's, Renovate, Restore and Renovate, spring checklist | Tags: , , , , , , , | 2 Comments

How to Make a Concrete Fire Pit or Fire Bowl in 5 Easy Steps

Adding a specialty feature like a fire pit to your backyard retreat can create a relaxing atmosphere in your landscape, not to mention, it can also help to extend the use of your outdoor space in cooler seasons, adding warmth and light. Even though a fire pit can be considered special, no special tools are required for do-it-yourselfers to make one.

How to Make a Fire Pit

How to Make a DIY Concrete FirepitIf a fire pit is more to your liking, here’s how you can make one:

Step 1. Prepare an area for the fire pit, making sure it’s a solid, level foundation with base rock or sand.

Step 2. Build a wood form for pouring concrete using wood nailed together in a square or a rectangle. The form needs an exterior box and a smaller interior box that creates a five-inch gap where the concrete goes. Build the form as high as you want the fire pit, using stakes to hold the wood in place as well as to the ground. Make the entire wood form sits level.

Step 3. Reinforce the wood form, making a grid with rebar. Drive pieces of rebar vertically into the corners and along every foot inside the form. Then run rebar horizontally between the vertical rebar and tie them together with steel metal wire. Cut wire mesh or matting pieces to fit inside the form for extra reinforcement and tie it to the rebar grid with wire.

Step 4. Pour concrete inside the form, tamping down to fill any holes. Smooth off the top with a trowel and tap the forms to release the wet concrete from the forms while drying. Let the concrete dry overnight. Once the concrete is completely dry, carefully remove the wood forms.

Step 5. Add any finishing touches to your concrete fire pit, such as a slate top or fine sanding of the concrete for smoothness. Fill with fire pit about three quarters full, placing a metal fire bowl on top, so it’s flush with the top of the concrete frame. Add decorative glass around the outside of the metal fire bowl until only the top rim of the bowl is exposed.

How to Make a Fire Bowl

How to Make a DIY Concrete Fire BowlIn fact, you can craft a modern, elegant fire bowl using nothing more than concrete, a tarp, sand, some plastic sheeting and a permanent marker.

Step 1. Lay out a 10-foot by 10-foot tarp on the ground, drawing a circle on it with the permanent marker that’s at least 36 inches wide.

Step 2. Pour out a bag of fine sand in the middle of the circle, adding enough water to make it the consistency of beach sand for building a sand castle. Begin to mound the sand into an inverted bowl shape as wide and round as the tarp circle, smoothing it out with your hands or a trowel. Continue to add wet sand to the mound, until it’s as large as you want the fire bowl to be. Cover the “sand mold” with a plastic sheet to prevent moisture evaporation.

Step 3. After preparing the concrete, take the plastic sheeting off the sand mold and cover it with the wet concrete, applying in layers until the concrete is about three inches thick. Insert several straws near the top of the concrete layer through to the sand, creating drain holes for rainwater. Cover with plastic sheeting.

Step 4. While the concrete is still wet, place a board on top of the covered concrete and use a level in north-south-east-west directions, making sure the top is level and straight for the bowl to sit on when it’s inverted. Smooth out as necessary.

Step 5. Allow the covering concrete to slow dry for at least 48 hours. Once it’s dry, lift the bowl from the sand mold and remove the straws. Lightly sand the concrete fire bowl to your preferred smoothness, if needed.

Expert Advice

Stop by our store for a full line of CTS Rapid Set concrete mixes, designed to harden and set within minutes, making your job faster and simpler and allowing you to move onto the next step of your project much sooner than with other concrete mixes. If you have any questions about what to choose, pricing or how-tos, our expert staff is always on hand to help you plan your next DIY project. We’re open seven days a week!

*Photo Courtesy of The DIY Network
Categories: How-To's | Tags: , , , , , , , , , , , | 19 Comments

Blog at WordPress.com.

%d bloggers like this: