Posts Tagged With: DIY how-to

Paint It, Don’t Replace It! Tips for Painting Tile

how to paint tileUgly, outdated tile is something many DIY homeowners want to fix. Replacing it is always an option, although this may be the costlier expense. You won’t have to live with it any longer, however. Paint it, don’t replace it! While not a permanent fix, painting your tile can freshen the look of a room and give you more time to make future renovations.

Preparation and Product Selection Are Key

The keys to successfully painting tile are preparing the surface properly and using the right type of paint. Preparing tile is a little more involved than painting drywall but the time you spend doing it right will help the paint look better and last longer.

3 Steps to Preparing Tile for Painting:

  • Clean it – Remove all the soap scum, dirt and mildew from the tiles and grout. Use an abrasive bathroom cleaner and rinse well.
  • Sand it – Rough up the surface using a 180/220 grit sandpaper (synthetic grit paper like silicon carbide or aluminum oxide work well) to remove the gloss off of the glazed surface. An orbital sander will do this quicker and more evenly than hand sanding.
  • Dust it – Wipe the tiles down with a damp cloth to remove any loose debris or grit. It can show through the paint.

Repair Tile and Grout Before Starting

Your tile and grout need to be in good shape. Paint amplifies any imperfection so make any repairs to cracked, chipped or broken tiles before starting. Re-do your grout if it is too dry and cracking. Remove all caulk from around tubs and counters. It is best to re-apply a fresh bead when your painting is finished. Tape off all fixtures, faucets and mirrors to avoid getting paint on them.

Tips for Painting Your Tile

  • Use an epoxy bonding primer to help the paint adhere properly.
  • For the best color selection use a latex paint (semi-gloss or high gloss) and apply 2 coats.
  • A paint sprayer will give you the smoothest results.
  • If you use a sponge brush, work in one direction to minimize streaks.
  • Lightly sand in between coats to help the paint stick.
  • Finish with several coats of sealant and allow 2-3 days to dry completely.

Painted Tiles Can Last 5 Years

This easy DIY project is a great way to freshen up outdated tile until you’re ready to redecorate or renovate. Painted tiles can last up to five years if you avoid harsh cleaners or scrub brushes. Stop living with ugly tile and get out the paint sprayer. That icky avocado green is going down!

Expert Advice

Wanting to try your hand at installing tile? Our blog, How to Install a Kitchen Tile Backsplash, has some great tips to get you started. From ladders and paint sprayers to grout cutting saws and orbital sanders, our expert staff is always on hand to help with your next home DIY project. As always, if you have any questions about pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, How-To's, Restore and Renovate | Tags: , , , , , , , , , , | Leave a comment

Light It Up – Add a DIY Bonfire to Your Backyard

fireThere is nothing better than a roaring fire on a cool spring evening. By adding a fire pit or heater you will extend the time you use your outdoor space for entertaining. Stop waiting for warmer weather! Building a fire pit is a simple, inexpensive project and one hot idea to add value to your home.

Let There Be Fire!

First, ask yourself a few questions about how you plan to use your fire pit or heater?

  • Do I want a heat source or ambience? – To heat a deck, a propane heater works well. If you want to roast marshmallows, nothing beats an open flame.
  • Do I want to burn wood or gas? – Consider the cost of logs and propane tanks when trying to decide. Electric heaters are also an option.
  • How much maintenance do I want? You will have to clean out ash and debris from a wood burning fire pit. Gas heaters will just need tanks replaced.

Watch Out for Flying Embersbonfire snacks

Got your heart set on an open flame fire pit? Constructing one is an easy weekend project. You can make yours as simple or elaborate as you wish.

Here are a few things to keep in mind:

  • Check local ordinances – Do they allow open fire pits in your area?
  • Locate your pit away from trees and buildings – Flying embers can ignite roofs and mulch.
  • Use fireproof materials – If you decide to use mortar make sure it is for use on fireplaces.
  • Scout out the desired location – Is it level and dry? Determine if wind direction will blow smoke back toward house. Too much wind will make it hard to keep your fire going.
  • Have a fire extinguisher handy – A bucket of water will work too.
  • Keep the area around pit clear – If building the pit on bare ground, lay gravel around it and make sure there is no vegetation or roots to burn.

Easy to Build, Easy to Enjoy

Above ground fire pits are easy to build. First determine the materials you want to use (concrete pavers, fire bricks, stones). You can dry fit the blocks or use mortar. Consider buying a removable metal fire pit bowl for easy clean-ups of ash. Also a wire cover will help catch flying embers.

Steps for Building a Fire Pit:

  • Use the diameter of the wire cover to determine the outline of your pit.
  • Lay the first layer of blocks around the outside edge of the cover.
  • Remove the cover and continue building layers up to desired height – Stagger blocks.
  • Use a level as you go.
  • Install a fire pit bowl – It can lift out and make clean-ups easier.
  • Install grate – To allow air to get to the logs.
  • Place your logs inside, light, and enjoy

Fire Bowls – Keep it Moving

Want something a little less permanent? Portable fire bowls are an inexpensive way to dress up your patio and can be moved into storage over the winter months. Be sure to cover them when not in use to help prevent rust.

Relax with a Blazing Fire

Watching a blazing fire under the stars is a great way to relax. Don’t let the crisp evenings of spring and fall keep you from enjoying the great outdoors. Move the party outside with a new fire pit, fire bowl or heater. Now it’s time to add another log to the fire and get ready for the S’mores. As the caveman once said – “Fire good!”.

Expert Advice

From shovels and wheelbarrows to tampers and concrete mixers, our expert staff is always on hand to help you find the right equipment for your next outdoor DIY project. Want more information on how to build your own fire pit? Check out our previous blog “How to Make a Concrete Fire Pit or Fire Bowl in 5 Easy Steps” for more helpful tips. As always, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, Fall Checklist, How-To's, Renovate, Restore and Renovate, spring checklist | Tags: , , , , , , , | 2 Comments

Refinishing – How to Breathe New Life into an Old Deck

Is your deck looking a little shabby? Is it in need of a makeover? Battling the elements can take a toll on your decking which is why regular maintenance is a must. Refinishing is an easy DIY project that will help extend the life of your outdoor space. After a good scrubbing and a fresh coat of stain, your deck will look like new.

Go Beyond Clean with a Pressure Washer

Remember, you aren’t just cleaning your deck but prepping it for a new coat of stain and protectant. You need to remove as much dirt, grime and old stains as possible. A pressure washer
with a fan nozzle works great for this. Use caution when trying to remove tough stains, the force of the water can gouge wood if focused in one spot too long. So keep it moving!

portland-pressure-washing.jpg

5 Tips for Cleaning Your Deck:

  • Cover your plants with plastic – This will help prevent chemicals from getting on them. Rinse the foliage off afterwards as an added measure.
  • Pressure wash – Use a cleanser that is specially formulated to clean decking materials. This keeps the wood from drying out. The most commonly used cleaners have TSP (Trisodium phosphate) in them but may be too harsh to use around plants.
  • Apply some elbow grease – Instead of trying to get tough stains up with the pressure washer, use a scrub brush.
  • Clean between boards – Use an old broom or brush to loosen debris from cracks and crevices.
  • Scrub railings and overhangs – All decking surfaces should be cleaned and refinished to protect them too.

Look for Needed Repairs

Now that you’ve finished washing the deck, allow it to dry for 24 hours. Use this time to inspect and replace any damaged boards. Look for popped nail heads and hammer them back in place.

Once your deck is completely dry, you can sand down rough spots and get ready for the stain.

There are four basic types of stain finishes:

  •  Clear – No tint or color but serves as a protectant for the wood.
  • Tinted – Wood colored tints allow for a uniform, natural appearance.
  • Semi-transparent – Gives some color but still allows for wood grain to show through.
  • Solid colors – Opaque paints hide the wood grain and provide ample color.

deck_refinish.jpg

Protect Your Deck from the Elements

Some new exterior paints/ stains can actually fill in small cracks and splits. Due to the thickness of these products, you will need a larger amount to cover your deck but multiple coats won’t be necessary. You can also find stains that contain skid resistant materials (like fine grit/sand) for added safety and still remain comfortable on bare feet.

Advice on applying stain to a deck:

  • Use a roller for larger areas – Paint brushes are great for railings and recesses.
  • Keep your color uniform – For a large area, mix all of your stain together to keep it consistent. Color may vary slightly from can to can.
  • Paint sprayers can clog – Read the label on the product you are using. Some stains are too thick for sprayers.
  • Avoid overlap marks – Work on a few deck boards at a time and paint lengthwise.
  • Let dry at least 24 hours – Test the surface before putting furniture back out. If it is tacky to the touch, give it more time to dry.

Give Your Deck a Makeover

If you’ve been thinking you need a new deck but can’t afford it, try refinishing first. A perfectly good entertainment space may be hidden beneath all that dirt and grime. All it needs is a little do-it-yourself TLC. Let’s face it, we can all use a little makeover from time to time.

refinished deck.jpeg

Expert Advice

From pressure washers and paint sprayers to sanders and nail guns, our expert staff is always on hand to help you find the right equipment for your next outdoor DIY project. Looking for additional information on maintaining your deck? Check out our previous blog “Seal and Stain Your Deck in 3 Easy Steps” for more helpful tips. As always, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: Choosing Equipment, DIY Projects, Featured Products, How-To's, Renovate, Restore and Renovate | Tags: , , , , , , , , , , | Leave a comment

9 Easy Steps to Keep Outdoor Lighting Bright

9 Outdoor Lighting Repair TipsOutdoor lighting for your home and yard is not only a practical design feature that keeps stairways, porches, patios and driveways bright during dark hours, but it adds style to your home’s exterior appearance. However, malfunctioning lights can signal neglect to neighbors and passersby, putting your property in potential danger. Luckily for homeowners, a few easy do-it-yourself steps are all you need to keep outdoor lights working correctly. So, get out the ladder and let’s begin!

Outdoor Lighting Maintenance

  1. Always turn off power
  2. Dismantle light fixture
  3. Clean out debris from around and inside with a brush, or blow it out with an air gun
  4. Wipe any grit and dirt away with a cloth or damp sponge
  5. Tighten any loose components on the inside of the fixture
  6. Replace all burnt-out bulbs; consider using energy-efficient lights
  7. Tighten screws on covers or lids
  8. Refocus light projections, if applicable
  9. Reset timers, if applicable

Troubleshooting Common Repairs

  • Survey for broken fixtures or light stakes (in the case of landscape lighting) and replace
  • Check for exposed wiring and re-tape
  • Intermittent lighting signals a connection issue; corrosion may be to blame
  • If all the lights are out, the cause could be an electrical short, a bad fuse or breaker
  • Dim bulbs indicate improper voltage

A DIY Fix for Corroded Light Fixtures

  • Trim an emery board with scissors to fit into the fixture
  • Remove the bulb
  • Lightly file the contacts in the fixture with the emery board
  • Spray the contacts with automotive ignition sealer to prevent future corrosion
  • Replace the bulb
  • Turn on power and check lighting

Leave Electrical Work to the Professionals

Diagnosing and repairing challenging problems with outdoor lights or an exterior lighting system is a challenge best left to a professional. Any electrical system – and the repairs made to them –must comply with specific electrical codes, which needs expert experience. Find a professional whose electrical experience includes exterior lighting and can resolve issues specific to outdoor systems such as voltage and corrosion.

About the Author

Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.

Categories: How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , | 1 Comment

How-to Tutorial: Stain Your Fence in 3 Simple Steps

Stain Your Fence in 3 Simple Steps

Staining and sealing a fence is a lot like staining and sealing your deck. In just three steps you can guarantee that its color and durability are maintained.

Step 1 – Prep the fence by clearing away any plants around the bottom and using a pressure washer to clean and remove tough residue.

Step 2 – Apply stain usinga hand-held paint sprayer for a consistent, uniform coat that goes on quickly. Fill the sprayer with the stain and spray it evenly from one end of the fence to the other in a steady, vertical pattern, overlapping each row.

Step 3 – For maximum protection, wait at least two days for the stain to dry. Then, seal the fence by applying sealer with a paintbrush or roller.

This is a very brief how-to, so if you would like more in-depth tips about staining outdoors, read this post about staining your deck. And as always, contact us or comment if you have additional questions!

About the Author

Jack Runyon is the president of Runyon Equipment Rental. He has 21 years of rental experience, as the 3rd generation son to carry on the family tradition and his grandfather’s vision. He prides the company for its devotion to ethics, quality products and customer service. Jack is known for his passion and vast expertise.

Categories: How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , | Leave a comment

Blog at WordPress.com.

%d bloggers like this: