Posts Tagged With: backyard pond

9 Tips for Building a Backyard Pond

how to make a backyard pondBackyard ponds filled with exotic fish and tranquil waterfalls are a beautiful addition to any landscape. In our previous blog, How to Build a Backyard Pond in 10 Simple Steps, we outline how to begin building a pond. Before you starting digging though, we have some tips to make this DIY project a success.

Pond Kits Give You Everything You’ll Need

The popularity of water gardening and fish ponds has grown so the supplies and the equipment you need are easy to find. Not sure what you will need? Pond kits come with all the required parts – pump, pipes and liner – and are readily available.

Bigger Ponds Are Better

If you use your own design, go bigger! The more fish and plants you have, the healthier the pond, so larger ponds actually require less maintenance. Keeping the water clean is key. Making sure you have the right size pump for your pond is important. Too small and the pump will be overworked and break down.

Pond Maintenance is a Must

A pond is very much like a swimming pool when it comes to maintenance. You will need to clean the filter frequently and remove any debris. Knowing how to service your own equipment will keep your costs down.

9 Tips for Building a Backyard Pond:

  • Buy a good liner – A good butyl rubber liner can last up to 20 years. Use carpet padding or landscape fabric underneath it for protection.
  • Avoid sharp rocks – Use smooth stones to line the pond to avoid tearing the liner. You need flat ones to line the edge.
  • Build a pond shelf – This is a partially submerged ledge where you can place plants.
  • Include rock overhangs – Give your fish places to hide and escape the hot sun.
  • Have a GFCI outlet – Plug the pump into a Ground Fault Circuit Interrupter outlet. It needs to be at least five feet away from any outdoor water.
  • Bury your electrical wires – Use PVC pipe to bury them safely in the ground and avoid having someone trip over them or an animal chew through them.
  • Consider your yard’s rain runoff – Locate the pond where it will not fill up with runoff water from your yard or a neighbor’s. Factor in an overflow stream or waterfall where the pond water can go if it does flood.
  • Add an eduction jet and skimmer – The eduction jet creates underwater currents to avoid stagnation and the skimmer will help clean of fallen leaves and debris.
  • Include a bead filter and UV Water clarifier – A bead filter traps sand and debris and a clarifier keeps algae blooms from occurring.

Landscape With A Purpose

Landscaping in and around the pond is your next big step. Select plants that will help keep the water clean and algae free. When installing your plants, use aquatic potting soil. Regular potting soil contains nutrients that will encourage algae growth. Mulch the plants with pea gravel. Start the plants on the pond ledge to acclimate them to the water. Once you have them in the right spot, then submerge them. Plants that add to your waterscape include:

  • Water moss
  • Hornwort
  • Curled pondweed
  • Lotus
  • Canna – Use in the pond or outside
  • Pitcher plant
  • Taro or Elephant’s Ear – Use in the pond or outside
  • Papyrus
  • Water Lily

Protect Your Fish

Feed your fish at least once a day during warm weather. Cut back to two or three times a week during colder weather. If you have a small pond, make sure it does not freeze solid during winter. Decaying plants release gases that get trapped under the ice and kill the fish. Install a floating deicer to keep the surface open.

Your Hard Work Pays Off

When you look back on the hard work that goes into this DIY protect and how great it turns out, you’ll be convinced that a backyard pond is a great investment for your home and a wonderfully relaxing place for your family to unwind.

Expert Advice

From backhoes and trenchers to wheelbarrows and shovels our expert staff is always on hand to help with your next DIY landscaping project. As always, if you have any questions about pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Advertisements
Categories: DIY Projects, Gardening and Lawn Care, How-To's | Tags: , , , , , , , , | Leave a comment

How to Build a Backyard Pond in 10 Simple Steps

how-to build a backyard pondOne sure way to add a beautiful focal point to any landscape is to introduce a water feature. What about building a backyard pond? It will not only add diversity, it attracts beneficial wildlife. Adding a small pond with trickling water is an easy weekend project, plus you and your family will enjoy it for years to come.

Keep it Close

To get the maximum enjoyment from your pond, keep it close to your home. You want to see and hear it from your windows or patio area. Because you need electricity for the pump, keep the pond within close proximity to an outdoor outlet. Most pumps come with a 24-foot power cord; any further than that and you will need to extend your power lines.

Not Too Much Sunlight, Please

Ponds need sunlight to support beneficial wildlife and they prefer partial daily exposure. Too much sun can warm the water too much and allow algae to thrive. Avoid positioning your pond near large trees. Roots can damage your lining in their quest for moisture. Besides, fishing leaves out of your pond all the time is no fun.

Habitat for Fish?

Do you want a fish pond? You and your family may enjoy taking care of fish. However, they will need to be fed daily and the pond filter will need to be cleaned or changed regularly. It’s a decision to make before committing to be “fish parents.” If you commit, build in water depth to the pond, which is more critical than circumference. You need to dig a minimum of 18 inches for goldfish and three feet for koi in order for them to survive the winter.

The Soothing Sounds of a Waterfall

Consider adding a waterfall to your pond. Keeping the water moving and aerated helps keep algae in check and prevents mosquitoes from laying eggs. Flowing water also attracts birds and other interesting wildlife. Plus you benefit from the soothing sounds yourself.

Time to Start Digging

Now that you’ve decided where and how large of a pond you want, it’s time to call 811 to have someone come out and determine where underground gas and electrical lines might be. Once you’re clear of that, it’s time to start digging.

  • Mark the outline – form the shape you want with twine or landscape paint.
  • Excavate the area – if you are going for a lovely large water feature you may want to consider using a Bobcat or an excavator to make your digging easier.
  • Terrace the pond
  • Create a 3-inch wide area around the outside of your outline for the stone border.
  • Create a 1-foot wide shelf around the inside of the outline for aquatic plants. It should be about 8 inches deep from the edge of the pond.
  • Dig the bed of the pond a minimum of 18 inches deep, sloping slightly in creating the walls.

4) Dig a trench back to the power supply – this should be close to the deepest part of the pond since that is where the pump will go.

5)   Add an overflow trench at one end of pond – It should be about 6 inches wide and 1 inch deep to help channel overflow caused by heavy rains away from your pond.

6)   Prepare the Base – Add a 1 inch layer of sand followed by a 1/2” layer of newspapers around the entire base of the pond and terrace areas. The newspaper will help protect the liner from punctures.

7)   Line the Pond – Use a polypropylene flexible liner that can withstand UV rays, freezing temps, and is rated “fish friendly”. Cut the liner about 4 feet wider and longer than the pond dimensions. Center the liner in the pond and press it down, pushing tightly into the crevices.

8)   Fill the Pond – Begin adding water to the pond using a garden hose. While the pond is filling up pull the liner tightly to help remove creases. Get someone to help with this so that the extra liner you’ve left over the pond edge will not shift.

9)   Install the pump – Thread the power cord through a PVC pipe and place it in the trench leading back to exterior outlet and backfill. Place the pump in the deepest section of the pond while holding onto the other end of the hose.

10) Create a Rock Border – To hide the liner edge place rocks around the perimeter. The rocks need to interlock so they will not be loose and cause a safety hazard. Create easy access for wildlife by extending some of the rocks into the shallow water.

Jump Start Your Pond’s Ecosystem

Landscaping inside and around your pond is important for completely the look of your water feature. It helps to attract wildlife like birds and butterflies, and looks pretty to the human eye, too. To jump start your pond’s ecosystem add a bucket of water from a nearby natural water source. It will introduce millions of organisms and help keep your pond’s health in balance with nature.

Expert Advice

Our expert staff is always on hand to help you with your landscaping projects. From Bobcats and excavators to shovels and wheel barrows, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Categories: DIY Projects, Gardening and Lawn Care, How-To's | Tags: , , , , , , , , | 4 Comments

Blog at WordPress.com.

%d bloggers like this: