Posts Tagged With: airless sprayer

Proper Techniques for Painting with a Paint Sprayer on Interior Projects

Handheld paint sprayers that use airless technology give do-it-yourself painters and painting contractors alike the ability to achieve a truly professional finish on both small jobs and touchup work with quick setup and easy cleanup. Operated by electric or battery power, handheld sprayers have a gun and pump built into the sprayer just like traditional models, with the added feature of portability.

Advantages of Airless Sprayers

Airless technology uses high pressure to force paint through a small nozzle or spray tip, creating a fast-moving, fine spray of liquid that atomizes or reacts with the outside air, breaking into small droplets that form a consistent spray pattern. The size of the spray tip determines the flow pressure and fan pattern. Designed for indoor and outdoor use, handheld airless paint sprayers are easy and economical, four times faster than brushing and at least two times faster than rolling. Paint, as well as a variety other coating materials from stains to heavy latex and acrylics, can be sprayed on all types of surfaces, resulting in a uniform, even finish.

About Paint Spray Guns

In addition to paint sprayers, paint spray guns also make quick work of painting. Some models of spray guns use innovative technology like intuitive spray gun controls, quick release fluid set, optimized air pressure and air flow, and different rotating positions to cover completely.

Proper Spray Techniques

  1. Achieve good spray pattern. Spray at the lowest pressure that completely atomizes the paint. Start at the lowest setting, adjusting slowly upward until the spray pattern shows no fingers or tails. Test the spray pattern on scraps of cardboard or other waste material. If the maximum sprayer pressure still isn’t enough, change out the spray tip for one with a smaller opening.
  1. Get a good aim. Position the paint sprayer about 12 inches from the surface and aim the spray straight at the surface. Move the paint sprayer across the surface with the wrist flexed, keeping the sprayer pointed straight at the surface. Avoid directly the paint spray at an angle, which will cause an uneven finish.
  1. Use a gentle trigger motion. Allow the paint sprayer to start moving in a stroking motion before triggering the paint stream during this lead stroke. Release the trigger before the end of the stroke, often called the lag stroke. Keep the paint sprayer moving throughout the paint spray to prevent too thick of a coating at the beginning and end of each stroke.
  1. Use an overlapping technique. Spray tips are designed for a 50% overlap of strokes to achieve a smooth, even amount of paint is sprayed on the surface with no visible lines in the finish. Spray the outside edges of ceilings or bare walls first before continuing to the middle of the surface.
  1. Painting corners. Aim the paint sprayer directly into the corner and spray along it rather than using a back and forth motion.

Beginner Mistakes

Two things beginner airless paint sprayers users should avoid are 1) Spraying at too high of a pressure and 2) Misfiring the trigger at the start and stop of each stroke

Expert Advice

Our expert staff is always on hand to help you with interior paint projects. We carry top-of-the-line Graco handheld airless paint sprayers. If you have any questions about what to choose, pricing or how-tos, don’t hesitate to contact us. Stop by our store — we’re open seven days a week. For more on paint sprayer techniques, read our blog, The Airless Sprayer: A Hidden Gem for All Your Painting Applications.

Categories: Choosing Equipment, Featured Products, How-To's | Tags: , , , , , , , , | 2 Comments

9 Ideas for Your Perfect DIY Bathroom Remodel

Feel brand new! Refreshing a room in your home –especially a bathroom- can be as easy as updating drawer pulls or a shower curtain, to installing new cabinetry, tearing out tile and starting all over again. Whatever your creative ideas –and your budget- can handle, here are a few ideas you can do in as little as a weekend to make your bathroom feel brand new. Below are nine ideas and tips for how to conquer a bathroom makeover.

DIY Bathroom Remodel - sink

1. Put some thought into your potty area.
Make sure you’ve got everything you need for your remodel – paint, plumbing fixtures, tile, tub, toilet and special orders – before you take a hammer or Sawzall drill to your bathroom, so you can use it all the way up to the day you start the project. Your family will thank you! Plus, with all you need on hand you can estimate the extent of work, such as moving the plumbing lines or running new lighting wires, more accurately.

2. White is the new black.
If you’re going to install new sinks, tubs or toilets, even surface tile, consider purchasing them in white. Manufacturers produce and sell more white bathroom fixtures than any other color, so they cost less than those potentially special-order varieties. Add splashes of color with low-cost accents, such as paint, furnishings, artwork, towels and other accessories.

3. Go to town with paint.
Bold enough to transform a room, yet practical enough for a weekend project, paint is great for freshening up a bathroom. Mold- and mildew-proof primers and paints are not only good for walls and ceilings, but for refinishing cabinet doors and hardware or towel racks and other fixtures. There are even options for painting over tile and other ceramics. Create a spa environment with watery blues, greens and neutral colors; even white does the trick. Use an airless sprayer for overall coverage and protect any painted designs with two coats of clear polyurethane. Learn more about using an airless paint sprayer here.

4. That old thing is new again.
Repurposing old furniture for a bathroom adds personality, not to mention, storage with character. Turn an existing sideboard or dresser into a vanity by cutting a hole in the top for a drop-in sink and faucet. Add a freestanding chest of drawers for storage. Install vintage shelving in smaller bathrooms. Comb salvage yards for vintage tubs, sinks, countertops, flooring, benches and other unique finds.

DIY Bathroom Remodel - sink and toilet5. Accent with architecture.
Using tile as an accent can add a punch of color in the right places. Even though glass tile can be expensive, you don’t need a lot of it to create a dazzling effect. Use a tile cutter to cut up larger tiles or break old tiles with a hammer to create your own mosaic designs. Apply colored gout quickly with a grout hand pump, adding an extra layer of design. Add interest to a wall by running a tile border vertically, instead of the usual horizontal accent. You can also add texture to walls by using beaded board. Use an air stapler to install panels, which look as authentic as individual beaded boards, are lightweight and less expensive. Think of the lighting as architectural interest, too – change outdated fixtures with new lights made especially for bathrooms and have a purpose. Recessed lighting over the shower for better illumination, Hollywood lights around a mirror for romance, even a floor or table lamp for a boudoir feeling.
 
6. Reflect a new image.
If your medicine cabinet looks like it belongs on the set of Mad Men, replace it by hanging a framed mirror or two, making the room seem larger. Some mirrors are made to tilt away from the wall, which adds functionality.

7. Daring demo.
If you plan to remove the floor, use a faster, simpler technique: rip up the floor from the underlayment – the layer of material next the subfloor. Set a circular saw blade just deep enough to cut through the floor covering and the plywood underlayment. Then cut into small sections, making removal easier. Afterwards, install a new underlayment of quarter-inch plywood or cement board and install the new floor on a clean surface.

8. Simple does it best.
Use basic tools like an air nailer, stapler or screw gun and make short work of easy updates like installing a new toilet seat, towel bars or toilet paper holder, replacing a standard shower rod with a curved one, adding pullout shelves to deep cabinets or changing out an old shower head with a new handheld sprayer. Even replacing the countertop is a simpler job with the right tools – if your vanity is in good condition.

9. Out of your comfort zone? Call a pro.
With any home project, do-it-yourself mistakes can cost you big time. If you need the help of an electrician, plumber, carpenter or mason for your bathroom update, call one. If you have questions or comments for us, please utilize our section below or the contact us page on our website. We’re here to help!

About the Author

Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.

Categories: Choosing Equipment, How-To's, Restore and Renovate | Tags: , , , , , , , , , , , , , , | 1 Comment

The Airless Sprayer: A Hidden Gem for All Your Painting Applications

Airless Paint Spraying ApplicationThere are probably several rooms, pieces of furniture or outdoor fixtures at your house that could use a fresh coat of paint. Or, perhaps if you’re a contractor you may have several jobs that require you and your crew to do painting applications. Now, although using a roller or brush to paint may seem most cost effective, there is actually another alternative that is much easier and provides the desired results you’re looking for in regards to cost, quality, time and flexibility. And what is this other appealing option? The airless paint sprayer – a device that comes with a variety of features to provide you with a crisp, clean, painted finish.

What Does Airless Mean Exactly?

Airless spraying breaks paint into small droplets without needing compressed air. So in essence, airless paint sprayers are self-contained, eliminating the need of an air compressor. Using an airless paint sprayer to do all your around-the-house or worksite painting is incredibly simple and uncomplicated in this regard. All you do is plug in your machine and press the trigger – it really is that easy. Another characteristic of airless paint spraying is that is provides uniform coverage. Even despite the roughness or unevenness of a surface, airless spraying gives a consistent, quality finish.

Airless Advantages

However, not only is airless paint spraying easy, but it is economical, quick, quality and versatile. These four advantages account for professional contractors’ preference toward airless sprayers.

  1. Economical: airless paint spraying is more accurate than using a paint brush or roller, which means the job is done right the first time, thus saving you time and money
  2. Speed: airless spraying is up to 4 times faster than rolling or brushing, so you can complete jobs in less time, allowing for more to get done and less labor needed
  3. Quality: as previously mentioned, airless sprayers produce a consistent, even coat of paint on all surface types, which leaves a high quality finish
  4. Versatility: airless sprayers can be used for a wide array of coating materials, for both interior and exterior jobs, and they are easily transported

Impressive Results

In conjunction with the above advantages, airless paint spraying elicits desirable results. As per the promise that airless is preferred over brushing or rolling, here are the reasons why:

  • You can finish jobs more quickly – which is a benefit for weather restraints, and on a job site you can stay from start to finish i.e. saving set-up labor
  • It allows you to complete more jobs with less labor – saving you the headache of involving more people
  • Airless paint spraying provides a consistent mil build – thus coatings perform better
  • Lastly, an airless paint sprayer applies a smooth, quality finish – a final result you can be proud of for years to come

Getting to Know the Key Components of an Airless Sprayer

Graco Airless Paint Sprayers

Don’t be overwhelmed by all the details of each type of sprayer – they really are simple and easy-to-use. There are actually three primary types: mounted with wheels, mounted without wheels and handheld. In addition, you can get the mounted paint sprayers as either electric– or gas-powered. Typically homeowners prefer to rent the handheld sprayers because they are less fuss and just powerful enough for standard projects once or twice a year. The mounted sprayers however, are more typical for contractors who will use them on a very frequent basis, hence why they are more powerful and offer greater capabilities and functionality. In addition to the sprayers themselves, they attach to special tips – these help determine the material flow rate.

Airless paint sprayers are the new-fangled paint catalysts for both homeowners and contractors alike. They offer a wide variety of features and benefits, and are not as expensive as one might think. If you would like more information about renting or buying one, please contact us. To learn more about how to use a paint sprayer i.e. more specifics on painting applications, read this post about painting to perfection.

About the Author

Heidi Hudnall is the current Marketing Coordinator at Runyon Companies. She graduated from Butler University in the spring with a double major in International Business and Marketing, a minor in Spanish, departmental honors distinction and cum laude. She specializes in all things internet marketing, with an emphasis on content creation, website maintenance, blogging, social media, lead tracking and marketing strategy.

Categories: Choosing Equipment, Fall Checklist, Featured Products | Tags: , , , , , , , , , , , , , , | 14 Comments

Create a free website or blog at WordPress.com.

%d bloggers like this: