Give Kitchen Cabinets a Face-lift in 10 Steps with New Stain

How to Restain Your Kitchen CabinetsWhile pondering your next home DIY project over a morning cup of coffee, you suddenly realize that it is staring you right in the face. Your kitchen cabinets could use a face-lift! Re-staining wood cabinets is an easy and economical way to perk up the busiest room in the house. If yours are looking a little lackluster, all you need is some wood stain and a little sweat equity.

What you will need:

  • Drill
  • Orbital sander
  • 220 grit sand paper and sanding block
  • Mineral spirits
  • Gel or spray stripping solvent
  • Putty knife
  • Tack cloth
  • Paint sprayer
  • Wood stain
  • Polyurethane coating

Do you have fiberboard cabinets?

Determine if your cabinets are hardwood or fiberboard. Test an out-of-the-way spot by sanding off the finish or paint. Fiberboard will not stain so you may have to re-paint them. If you have hardwood cabinets, then you’re ready to start.

10 Steps to Reinvigorate Kitchen Cabinets with Stain

  1. Remove the doors from the cabinets – Clean out all cabinets and drawers. Label the doors and cabinets so that you can re-assemble them in the correct order at the end of project.
  2. Unscrew all hardware and hinges – If you are keeping existing hardware, label them to match where they came from.
  3. Clean the surfaces – Use mineral spirits to clean dirt and grease from the wood. It may take several passes.
  4. Apply gel stripper – Spread the solvent onto your cabinets and allow it to bubble up old finishes or paint. Scrape it off with a putty knife. These chemicals are very corrosive and toxic so wear a mask, gloves and safety googles.
  5. Use wood putty to fill holes and gouges – To install new hardware, cover the old holes with wood filler and let dry 24 hours.
  6. Sand all surfaces – An orbital sander with 220 grit sandpaper will smooth the wood and remove any old paint or finish. For any trim or hard to reach places, it is best to sand by hand. Wipe with tack cloth to remove dust and debris.
  7. Apply stain – Work with the wood grain and apply light, even coats. Wipe excess off with a cloth. To get a deeper color, apply several coats not thicker ones. Allow wood to dry completely between each pass.
  8. Add a polyurethane coating – This will help protect the wood and allow for easier cleaning. A paint sprayer will make it easier to do a large number of cabinets and will help prevent streaks.
  9. Re-assemble the cabinets – Match the numbered doors to corresponding cabinets.
  10. Install new hardware – Drill new holes to add new knobs, pulls and hinges.

You are on a roll!

Staining the existing wood cabinets is not only a great way to freshen up the look of your kitchen without spending a lot of money, recycling the cabinets is also eco-friendly. Now that you’ve done such a great job on the cabinets maybe it’s time to tackle the backsplash. Looks like you’ve found your next DIY project without even trying. You are on a roll!

Expert Advice

Whether orbital sanders, drills or paint sprayers, our expert staff is always on hand to help you find the right equipment to handle your home DIY project. If re-staining the cabinets isn’t enough of a change for your kitchen, check out our blog, How to Paint Your Kitchen Cabinets to Perfection for some excellent tips on doing it like a pro. As always, if you have any questions about what to choose, pricing or how-to’s, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.

Advertisements
Categories: DIY Projects, How-To's, Restore and Renovate | Tags: , , , , , , , , | Leave a comment

Post navigation

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Blog at WordPress.com.

%d bloggers like this: