Protect your home from winter’s wrath! We’re here to help you navigate all the challenges of the season with the second of a four-part special edition on our blog, outlining the basics of cold weather preparedness. Today, we’re talking insulation.
Winterizing your home with insulation is one of the most economical – and efficient – ways to save energy, keeping you and your family warm and toasty. In addition to caulking, weather-stripping and installing storm windows and doors (or covering them with plastic), adding insulation to walls and attics (even floors, basements, garages, barns, sheds or any place that provides shelter for your family and pets, livestock and equipment) can make a difference keeping warm air in and cold air out.
1. Twelve to 15 inches of roll insulation in your attic is one of the easiest ways to achieve insulation protection. Do-it-yourself insulating is simplified when you use an insulation vacuum and blower, which blow insulating foam into the area.
For more information on how to insulate your attic, read this blog post.
2. Consider closing off the attic using a sheet of plywood to cover the opening. To cut down on cold air leaking into the living space, create an airtight seal by attaching foam insulation pads to the back of the attic door and applying foam weather stripping tape around it, just as you would any other door. You can also install an insulated attic tent that fits over the pull-down stairs (if applicable).
3. Insulate pipes to keep them from freezing. Insulating hot water pipes will help decrease the cost of hot water, too. Cut pre-slit high R-value pipe foam to size and fasten it in pace with duct tape. Take it up a notch by wrapping (or re-wrapping) your hot water tank, using an insulation blanket and securing it tightly around the tank (tankless water heaters do not need this precaution). Seal air ducts in your attic and basement using a roll of HVAC foil tape, available at home centers. Simply wrap the tape around joints and secure.
4. One place you may not think about is your light switches and outlets. These holes in the wall are usually covered with thin plastic covers that probably provide little protection against cold air leaking into the living space. Install pre-cut foam gaskets underneath your light switch and outlet covers, which will act like weather stripping in the smallest places. Hey, every little bit counts!
Our expert staff is always on hand to help you with the cold weather basics of insulating your home. For the first installment in this series, check out the first post about snow removal. From insulation equipment, accessories and everything in-between, if you have any questions about what to choose, pricing or how-tos, don’t hesitate to contact us. Stop by our store — we’re open seven days a week.