Repurposing furniture is one of the most satisfying and self-accomplished thing an avid DIY-er can do, myself included. My husband and I were thrilled at the prospect of making a personalized coffee bar for our new apartment, perfect to house all our tea and coffee essentials. Coming from a fairly handy family, it just so happens that my dad had the perfect piece of furniture…an old record player with loads of character. With a little help from him [and all his power tools] we turned this dated record player into a fun and functional coffee bar.
First things first, we assembled our tools and materials….
Tools & Materials:
- Spray paint
- Vibrating saw
- Louwon board
- Jigsaw or band saw
- Air nailer
- Annie Sloan paint and brush
- Contact cement and wooden roller
Then we got to work transforming our soon-to-be coffee bar. You can see what it looked like before (let’s just say my dad had other plans for it before I got ahold of it…hence the green spray paint). Then, see the painted and waxed pieces ready for assembly. [Note: a few key steps are left out of the gallery, but read about them in the steps below].
- Clear and Spray Paint the Hardware: use your screwdriver and pliers to remove hardware, such as handles, hinges, etc. All the removed hardware was then spray painted with glossy black paint.
- Flush Cut the Wood: for removing wood pieces precisely and accurately, use a vibrating saw. For this piece of furniture, the bottom piece where the lid lifts up was removed (see the lid picture above). In addition, the back of the cabinet was removed and a new panel was installed (see how in next step).
- Cut and Mount Louwon Board: a new back for the cabinet was installed, made from Louwon. In order to get a precise piece, a paper template was placed and a handheld power jigsaw (or band saw) made the exact cuts. Then the board was put in place and attached with an air nailer. [Note: for this coffee bar there is actually a secret compartment in the bottom right compartment, so that back part was carefully cut out and a new bottom was installed to make a shelf for more storage].
- Paint the Doors, Frames and Coffee Bar: the lattice frames, two doors (from the top lid and front right), as well as the coffee bar itself, were painted thoroughly with Annie Sloan paint and then sealed with Annie Sloan wax. This paint is easy to apply and only takes one well-covered coat. The beauty of it is the shabby-chic look it portrays.
- Reupholster and Mount Door Inserts: the old door inserts were removed, as were the old fabric panels by unscrewing from the lattice frames. While the lattice frames were painted and drying (as seen in the picture above), new leather panels were measured and mounted to the insert boards with contact cement. After the leather panels dried and the lattice frames also dried, the panels were screwed back into the frames.
- Reattach the Doors and Frames: the doors and frames were reattached to the coffee bar with their respective hardware. Then voila! The completed coffee bar!
A Word From Me (the author):
Although your next DIY project probably won’t entail turning a record player into a coffee bar, there are many ideas out there for repurposing old furniture into functional and stylish pieces for your home. Check out Pinterest for a little inspiration! That said, some of the tools and applications from this project can definitely be used for yours. Simply let us know what tools you are looking for, because we do daily rentals out the wahzoo! And please comment below if you have any great ideas for DIY upcycles or your own projects to share.