Do you remember the television character Fred the Baker and his line “Time to make the donuts”? It’s a classic commercial for regional coffee chain Dunkin’ Donuts – named one of the top five in the ’80s. Well, Fred and his trustworthy work ethic became so popular that his “Time to make the donuts” catch phrase earned a place in pop culture as the quintessential expression for the drudgery of repetitive chores. So, you’ll get it when we say, “Time to clean the pool!”
Easy Pool and Hot Tub Maintenance
Let’s make maintaining the pool or hot tub less of a chore this year. These days in fact, automatic pool cleaners are available from your local hardware store. These cleaners (whether vinyl, concrete or fiberglass) can easily remove dirt, twigs, leaves and debris from any in-ground pool or spa. They work with the existing skimmer, pump and filter, and they can save you from the drudgery of vacuuming for years to come. Or, if you prefer to do the maintenance yourself, try these easy tips for keeping your pool or hot tub perfectly crystal-clear.
1) Trim, Skim and Vacuum
Trim back trees or bushes near your pool or hot tub that can shed pollen, blossoms or leaves onto the surface. Skim the water surface to remove floating debris and empty the skimmer basket. Vacuum slowly across the water, overlapping areas like you would when mowing a lawn. The average pool requires 30 minutes of vacuuming. Use a nylon brush (or a stainless steel brush for concrete) to brush away any algae off the sides.
2) Drain, Scrub and Cover
Every three months, drain the hot tub of water. Then, clean thoroughly with a mild cleaner, avoiding anything that’s too abrasive, which can damage the acrylic shell. Remember to clean the hot tub cover too. Use a cleaner made for vinyl or a weak chlorine solution and let it air-dry before re-covering the hot tub.
3) Adjust Chemistry
The correct chemistry for a pool or hot tub is critical to keeping the water clear and safe. Test the chemicals weekly. Adjust pH first if needed or “shock” the water by dissolving chlorine and/or and alkalinity increaser in a little water, then pour it in.
4) Backwash, Clean and Add Chlorine
Every week, redirect water flow into the filter by backwashing dirty water into the filter bag or to the storm drain. If the pool has a cartridge-type filter, remove it for rinsing and reinsert. Hot tub filters are cleaned in a similar way. Next, shut the filter system off, close the skimmer valve and clean out the hair/lint catcher of a pool pump. Empty the contents of the basket in the trap and reinsert. Finally, add chlorine to the pool using a floating container, which holds chlorine sticks or a chlorinator (the tube-like tank next to the filter that slowly introduces chlorine into the pool automatically). Use the amount recommended on the packaging.
5) Check Levels
Finally, check the water level in the pool or hot tub, refilling if necessary. In general, pool and hot tub design provides for convenient, at-home maintenance. Remember to consult the product manual when choosing chemicals and cleaning agents. With consistent care, you can change, “Time to clean the pool” to “Time to have some fun in the pool!”
About the Author
Tempe Thompson is a sales and inventory expert at Runyon Equipment Rental. She has over 35 years of experience and has accumulated a tremendous amount of knowledge and expertise. She could talk for hours about how to use all of Runyon’s tools and equipment, in addition to suggesting which type corresponds to a certain application.