Okay so we have all built our custom headboards by now right? Good! Still got the bug to make changes in your bedroom, how about freshening up your dressers and night stand? This dresser makeover pin is the perfect starting point. This DIY-er re-finished her dresser, along with a couple of night stands. Now this is a somewhat in-depth project with many steps, but seeing your like-new redone furniture will make the effort well worth it!
First things first, prep and paint your furniture.
You’ll need a drill to remove all hardware from the drawers. Then, remove the drawers as well. Grab your sander and fine grit sandpaper, ideally 220, and smooth out all the surfaces you plan on painting. You don’t want to do too much sanding, you are just trying to get a nice, smooth surface that is ready for paint. Once you’ve sanded, paint your little heart out — a couple coats of primer and then a couple coats of your color of choice.
Dress up your dresser with new hardware.
Before you put your drawers back in you’ll need to address your hardware. So if you’re replacing them, now is the time to get your drill and put your new hardware on. But why not take that old hardware and refinish it like you did your dresser? Find an old board and use your drill to fasten all your hardware to the board so that while you paint everything stays in place and gets a nice even coat of paint. While you wait for everything to dry, look back at your before pictures and compare the difference so far — pretty amazing huh?
If you’re feeling fancy, get out the glaze.
If you’re feeling fancy, now is the time to give your refinished dresser not only a new look, but a new feel! Glazing is a really great way to give a rustic flair to an otherwise plane jane piece of furniture. Grab your sander and that fine grit paper and sand away, again. Tedious maybe, but you are ensuring that you will have the best finish possible, one that will last for years to come. Now with your accent color, paint the insets of the dresser. Once you’ve done that, line the drawers up and start glazing. You will want to glaze them all at the same time in an effort to keep the glazing pattern consistent. Once it has all dried and you are happy with your new finish, seal it with a clear coat. You can spray the sealer on the faces of the dresser and paint it on all the large flat surfaces.
After all is said and done, you are going to have a beautifully re-finished dresser that changes the whole mood of your room. Enjoy your restful oasis while you can, because spring is just around the corner, and we all know that after this winter it will be hard to stay inside except to sleep! Happy refinishing!